Wireless Firing Systems
FTQ Batteries

All currently produced fireTEK devices included rechargeable LiPo batteries and the capability to add external power sources. 

The internal battery of the FTQ firing module is a single cell 3.7V@2800mAh LiPo battery that can provide 24hours of standby power and is charged through a convenient USB C port.  

Note: This 3.7V battery is more than capable of charging the 1.5 Farads of stored capacitance on the Power Board allowing up to 29V of firing power

If the battery needs to be replaced, the single cell 3.7V@2800mAh LiPo battery is relatively easy to purchase at any battery retailer either locally or on line and can be replaced by the user. 

Note:  If the internal battery is completely depleted or even removed, the FTQ module can still function with an external USB power source

If the FTQ module is not going to be used for more than 2 months, it is recommended to discharge the battery to one bar on the battery icon prior to storing the module. 

Leave a comment

Your email address will not be published. Required fields are marked *


Remotes and Modules

fireTEK – the flexible and capable multi-function firing system with a remote The fireTEK FTM-99 Remote can control up to 99 fireTEK Modules or other

Read More »

Multiple Modules

flexABLE capablities of multiple FTQ 16×64 modules. With a fireTEK module set to Master Mode, up to 98 additional fireTEK modules can be set to Slave Mode across

Read More »

One Module

flexABLE capablities of a single FTQ 16×64 module. A single fireTEK module without a remote or additional modules is still capable to provide many functions across

Read More »