Wireless Firing Systems
FTQ Charging and External Power


The standard FTQ internal battery is charged with a standard USB charger and USB C cable.  Similar to modern personal electronic devices charging, the fireTEK devices can conveniently be charged anywhere. 

External Power

This is standard with the FTQ modules.  The USB C Port also allows the use of any standard USB battery pack or USB power source as external power.  Adding an external power source can extend standby time and increase firing voltage.  

The external power source can be connected or disconnected to the firing module at any time, even when the module is in operation. 

Here are some various ideas for external power

  • A usb wall charger
  • A external usb battery
  • A USB adapter for portable power tool batteries
  • A DC converter with Step Down voltage Regulator 

FTQ Buddy Power

FTQ modules can share power by connecting two modules together via the USB port. 

2-wire charging

If the FTQ module is used in a 2-wire network and the 2-wire controller provides power over the physical network, the FTQ modules can also be charged from the 2-wire network.

Leave a comment

Your email address will not be published. Required fields are marked *


Remotes and Modules

fireTEK – the flexible and capable multi-function firing system with a remote The fireTEK FTM-99 Remote can control up to 99 fireTEK Modules or other

Read More »

Multiple Modules

flexABLE capablities of multiple FTQ 16×64 modules. With a fireTEK module set to Master Mode, up to 98 additional fireTEK modules can be set to Slave Mode across

Read More »

One Module

flexABLE capablities of a single FTQ 16×64 module. A single fireTEK module without a remote or additional modules is still capable to provide many functions across

Read More »